PRODUCTS


Clear All

Selected Filters


  • A/D Firefilm III

    Features:

    • UL/ULC, ITS and ICC-ES Listed – designs for many types of steel sections. Up to 3 hour fire ratings for both interior general purpose and interior conditioned space applications.
    • Decorative Finish – Gives a smooth, decorative finish. Compatible topcoats available in a wide range of colors.
    • Advanced fiber free formulation - dust free surface.
    • Durable finish – Provides a hard, impact and abrasion resistant surface.
    • Topcoat finishes smooth to slight orange peel.
    • Thin film coating – space saving smaller column footprints.
    • Low VOC content.
    • LEED compliant

    Description:

    A/D Firefilm III is a decorative, fiber free, thin film intumescent coating designed for the fire protection of steelwork for up to a 3 hour fire rating, depending on the design. The recommended use for this product is fireproofing of interior steel beams, columns, tubes, and pipes.


  • Armorlast I (2K)

    Features:

    • Outstanding weatherability
    • Long life performance
    • High temperature resistance
    • Available in various colors
    • Isocyanate free
    • Meets Class B Slip Co-Efficient over Carbozinc 11 HS

    Description:

    Armorlast I (2K) is a high build inorganic topcoat used to seal and protect inorganic zinc primers. The film exhibits exceptional toughness, high temperature resistance, and is available in a limited assortment of colors. Being inorganic, Armorlast I (2K) provides exceptional weatherability and long-term performance. When used as finish over a permanent zinc primer, the system becomes an ultra-long lasting corrosion resistant system.


  • Carboclean Cons 200

    Features:

    • Carboclean Cons 200 is used to remove oxides (rust), chalk, magnetite, humus, salt, concrete, shell, algae and other deposits. Well-suited for internal treatment of pipes and piping systems made of metals and plastic-/polyester products. Does not damage paints, plastics, metals, linings or packings.

    Description:

    The product is a biologically degradable liquid without any hazardous substances. It is approved as a HOCNF Class Yellow product, and can be disposed to drains/sewage systems without containment. Active ingredients are citric acid, phosphoric acid, inhibitor and water. It has a light red colour, sour smell and a pH value of 1,1 til 1,7 with density 1.14 g/cm³.


  • Carboclean Gel 100

    Features:

    • Carboclean Gel 100 is used to remove oxides (rust), chalk, magnetite, humus, salt, concrete, shell, algae and other deposits. Well-suited for treatment of ceilings, walls and other surfaces treatment of metals and plastic-/polyester products. The gel tixotropy gives the product time to work without sagging and drying out. Does not damage paints, plastics, metals, linings or packings.

    Description:

    The product is a biologically degradable liquid without any hazardous substances. It is approved as a HOCNF Class Yellow product, and can be disposed to drains/sewage systems without containment. Active ingredients are citric acid, phosphoric acid, inhibitor and water. It has a light red colour, sour smell and a pH value of 1,1 til 1,7 with density 1.23 g/cm³.


  • Carbocoat 111

    Features:

    • • Fast Dry Properties.
    • • Can be applied down to 4°C (39°F).

    Description:

    Carbocoat 111, quick drying, is a high quality industrial protective coating. It can be applied with conventional air or airless spray systems.


  • Carbocoat 115

    Features:

    • Rapid cure
    • VOC compliant for most areas
    • Good for filling properties on rough and pitted steel
    • Fast dry to handle properties

    Description:

    Fast drying steel primer that provides corrosion protection on structural steel. Well suited for fabrication shops that need fast cure to dry and handle times. May be topcoated with conventional alkyds or acrylics for color, aesthetics or additional protection.


  • Carbocoat 1310 Primer

    Features:

    Description:

    Carbocoat 1310 Primer is a multipurpose primer with excellent adhesion to steel, iron and cast iron. The primer is fast drying and can be used for most industrial services in normal corrosive environment. Recommended for OEM and maintenance applications.


  • Carbocoat 1342 Primer

    Features:

    Description:

    Rust preventing primer. Use with or without topcoat. Typically used as a primer above water line on areas like superstructure, topside, deck, stores room, cargo hold etc.


  • Carbocoat 1343 Finish

    Features:

    Description:

    Carbocoat 1343 Finish has good light- and weather resistance and is suitable for use both in- and outdoors.


  • Carbocoat 139

    Features:

    • One component product
    • Excellent flexibility
    • Good abrasion resistance
    • Can be applied by Airless- and conventional spray, roller and brush
    • Good color and UV resistance

    Description:

    Modified polyurethane industrial enamel for broad use on interior and exterior metal surface where a durable, easy-to apply, single pack coating is desired.